Privacy Policy
ELGINHILL Ltd |  Lane End Cottage| Long Lane | Tilston | Cheshire | SY14 7HA   
© 2018 Elginhill Limited - All Rights Reserved
Simbell Wireless

SIMBELL 12  SOFTWARE 

We have written several pieces of software to go with the SIMBELL Hardware which are the quickest way to get you up and running. You can always get the latest version from this page, and all updates are free of charge. New: v1.03 brings support for 12 Bell Towers as well as a design makeover to make things a little clearer.

Downloading

We have checked the software for viruses but we suggest that you also check any download that you make for viruses prior to installation. If you get any reports of any file downloaded from this site as being infected, please contact us. SIMBELL - WINDOWS Older version :   v1.01 - Click to Download  SIMBELL 12 - Latest version :  v1.03 - Click to Download

Software Utilities

www.simbell.co.uk

SIMBELL DIAGNOSTICS 

If you are having problems with your system, then you can download and use this monitor (Windows Only) which will allow you to see what is happening with the transmitters and receivers and which will create a diagnostic file which you can send to us so we can assist you should this be required.

Downloading

We have checked the software for viruses but we suggest that you also check any download that you make for viruses prior to installation. If you get any reports of any file downloaded from this site as being infected, please contact us. SIMBELL MONITOR (WINDOWS) Older version :   v1.00 - Click to Download  Latest version :   v1.01 - Click to Download NEW!
SIMBELL is compatible with all the major Church Bell Simulator Software such as Virtual Belfry , Abel and Beltower  however if you “just want a bong” .. then we have written several pieces of software to go with the SIMBELL Hardware which are the quickest way to get you up and running. You can always get the latest versions (as well as older ones) from this page, and all updates are free of charge.

SIMBELL 16 SOFTWARE

The new SIMBELL 16 Software brings support for up to 16 Bells and a new sound processing system to provide

more accurate playback. This new version also will work with a single bell, and for those who want to see a bit

more, or from further away, the indicators will increase and decrease in size so you can see them on the smallest

screen.

We have also made installation a snip

by adding an installation program and

we have also produced a video on how

to install and configure SIMBELL 16.

Simply pressing the SHIFT KEY and left

clicking on an indicator allows you to

set the .WAV file for the sound that you

want playing for that Bell, and a right click will bring up the Delay Setting for each bell.

Everything is automatically saved ready for next time.

SIMBELL 16 version :  v1.07 - Click to Download (.exe)
INSTALLATION VIDEO NOW AVAILABLE

SIMBELL Hardware / Software Drivers

Most operating systems have the drivers built in for the USB Connection that we use to connect to the receiver, however we have had a few instances where the software drivers required were not found. If you check in device manager in Windows and see that the COM Port is not configured correctly then you can download the drivers from the link below, unzip the files to a new folder and then from this folder select and double click the file  called “CH340 Windows.exe” and this will start the driver installation program, allow the program to make changes when prompted and then click INSTALL to install the drivers. When complete the USB COM PORT should work correctly and will indicate the assigned Port Number ( e.g. COM1 COM2 etc ) Of course if you have any problems then please contact us and we will assist as required.
SIMBELL V2.0 - USB CH340 USB Drivers - 2017.7.6.14  -  Click to Download (Note: If you require the SIMBELL V1.0 - USB Drivers, please contact us)
Wireless Easy Installation / Portable Low Cost 12 Month “Cast Iron Guarantee” Practice anytime Abel  & Virtual Belfry  Compatible
Benefits
 
 
(Released 06/07/2018)